Product Quick Search
     
 
 Product Literature

Conveyor CatalogClick here to view product catalog in PDF format.

Click here to receive a copy of our current conveyor & conveyor accessory catalog.

       
 Knowledge Base
 

Bearing Basics
Belt Lacing Instructions
Belt Tracking
Belt Replacement Guide
Belt Selection Guide
Conveyor Maintenance
Drive Chain Tensioning
Glossary - Conveyor Terms
Gravity Conveyor Basics

Click here
to learn
more
about our
Plastic
Belt
Conveyors

 
 
 
 

Subscribe to our Newsletter!
View Newsletter Archive

 
 
   

Search for:

 

 
 
 Chain Driven Roller Conveyor Products
MODEL CDLR25
 CHAIN DRIVEN LIVE ROLLER CONVEYOR 2.5" DIA., 11 GAUGE ROLLER

 

  Catalog Sheet Installation, Operation & Maintenance Manual

                                                                             The CHAIN DRIVEN LIVE ROLLER CONVEYOR offers a positive drive for handling heavier loads of drums, castings, and tote pans. It can be used in wet, oily, or contaminated applications because of its rugged construction.


Roll your pointer over the numbers
to view the feature description.

 

  Roller Centers: 4.00” with 40A21 sprockets; 4.50” with 60A15 sprockets; 5.00” with 50A19 sprockets; 6.00” with 60A16 sprockets; 7.50” with 60A16 sprockets; 12.00” with 60A16 sprockets.
Effective Widths: 13”, 19”, 25”, 31”, 37”, 43”, 49”, 54”, 57”, and 61”. Also available from 6” to 61” in 1” increments.
Lengths: Even increments of the roller centers up to 75’. Length also limited to 75 rollers on each side of the drive.
Drive: Standard D16 - side, bottom, near center with live axle drive roller. Drive has cast iron worm gear speed reducer with a standard M03 3/4 H.P. 230/460 TEFC motor.
Speed: Standard 30 feet per minute. Also available from 1 to 120 feet per minute.
Rollers: Standard 2511; 2.5 dia., 11 ga. wall tubes with 11/16 hex cold rolled steel axle, spring retained. Standard A51 bearing are grease packed.
Frames: Standard F23 6” x 1-1/2” x 3/16” channel on chain box side, 4” x 1-1/2” x 3/16” channel roller set high on idler side with bolted 5” x 1-1/2” x 3/16” crosstie.
Chain Covers: 1/8” steel with two piece construction for easy access to chain loops.
Supports: SPHH style adjustable set for standard 36” top of rollers located on nominal 5’ centers. Also available from 11” to 42” top of roller at no additional charge.
Capacity: Up to 1,000 lbs. per lineal foot of conveyor with supports on 5’ centers. Several factors affect conveyor capacity. Consult factory to evaluate specific applications.
Guard Rails: Standard G99: No Guard Rail.
Roll Covers: Standard V98: No Roll Cover.
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat.
 
 

OPTIONAL COMPONENTS
(Click for description)

DRIVE D16; D10; D11; D12; D13; D14; D15; D16; D17; D18; D19; D20; D21; D99

FRAME

F23; F08; F17; F22
GUARD RAIL G99; G82; G83
MOTOR M03; M01; M02; M04; M05; M06; M07; M08; M09; M10; M11; M12; M13; M14; M15; M16; M17; M18; M19; M20; M21; M22; M23; M24; M25; M26; M27; M28; M29; M30; M31; M32; M33; M34; M97; M98; M99
ROLLER BEARING A51;  A53; A55; A59; A60; A62
ROLL COVER V98; V11; V42; V73
SUPPORT CENTER SCC10; SCC0
FINISH PP94; PP09; PP11; PP24; PP45; PP95

 

HOW TO ORDER

CDLR25 - EW - RC - LG - SP - BE - EE- DRIVE - FRAME - GDRAIL - MOTOR- ROLBRG - ROLCV - SUPCC - FINISH

EXAMPLE: CDLR25 - 13 - 4 - 120 - 30 - 36 - 36 - D16 - F23 - G99 - M03 - A51 - V98 - SCC10 - PP94

 


 

   
   
  Product Catalog | Site Map | Contact Us | Gravity | Powered | Accessories | Systems | Parts & Service | About Us

706 Lane Street | Sandusky, OH 44870
Sales: 419-625-4014 | Fax: 419-625-1247 | Email: sales@lewcoinc.com

Copyright (c) 2005 LEWCO, Inc. All rights reserved.