Product Quick Search
     
 
 Product Literature

Conveyor CatalogClick here to view product catalog in PDF format.

Click here to receive a copy of our current conveyor & conveyor accessory catalog.
       
 Knowledge Base
 

Bearing Basics
Belt Lacing Instructions
 Belt Tracking
Belt Replacement Guide
Belt Selection Guide
Conveyor Maintenance
Drive Chain Tensioning
 Glossary - Conveyor Terms
 Gravity Conveyor Basics

Click here
to learn
more
about our
Plastic
Belt
Conveyors

 		  
 
 

Subscribe to our Newsletter!
View Newsletter Archive

 		  
   

Search for:

 
 
 
 Chain Driven Roller Conveyor Products
MODEL CDLR19
 CHAIN DRIVEN LIVE ROLLER CONVEYOR 1.9" DIA., 12 GAUGE ROLLER

 

  Catalog Sheet |

Installation, Operation & Maintenance Manual

The CHAIN DRIVEN LIVE ROLLER CONVEYOR offers a positive drive for handling heavier loads of drums, castings, and tote pans. It can be used in wet, oily, or contaminated applications because of its rugged construction.


Roll your pointer over the numbers
to view the feature description.
 

   Roller Centers: 3.500” or 4.000” with 40A18 sprockets.
Effective Widths: Standard widths are 13”, 19”, 25”, 31,” 37”, 43," and 49”. Also available from 6” to 49” in 1” increments.
Lengths: Even increments of the roller centers up to 50’. Length also limited to 75 rollers on each side of the drive.
Drive: Standard D16 - side, bottom, near center with live axle drive roller. Drive has cast iron worm gear speed reducer with a standard M99 1/2 H.P. 230/460 TEFC motor.
Speed: Standard 30 feet per minute. Also available from 1 to 120 feet per minute.
Rollers: Standard 1912; 1.9 dia., 12 ga. wall tubes with 7/16” hex cold rolled steel axle, spring retained. Standard A23 bearings are grease packed with front and back seals.
Frame: Standard F25 5” x 1-1/2” x 3/16” channel on chain; box side, 3-1/2” x 1-1/2” x 3/16” channel roller set high on idler side with bolted 5” x 1-1/2” x 3/16” crosstie.
Chain Covers: 1/8” steel with two piece construction for easy access to chain loops.
Supports: SPHH style adjustable set for standard 36” top of rollers located on nominal 10’ centers. Also available from 11” to 42” top of roller at no additional charge.
Capacity: Up to 400 lbs. per lineal foot of conveyor with supports on 10’ centers. Several factors affect conveyor capacity. Consult factory to evaluate specific applications.
Guard Rails: Standard G99: No Guard Rail.
Roll Covers: Standard V98: No Roll Cover.
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat.
 
   

OPTIONAL COMPONENTS
 (Click for description)
DRIVE

D16; D10; D11; D12; D13; D14; D15; D16; D17; D18; D19; D20; D21; D95; D99

FRAME

 F25; F24; F12
GUARD RAIL G99; GC; G36; G37; G38; G39; G40
MOTOR M03; M01; M02; M04; M05; M06; M07; M08; M09; M10; M11; M12; M13; M14; M15; M16; M17; M18; M19; M20; M21; M22; M23; M24; M25; M26; M27; M28; M29; M30; M31; M32; M33; M34; M97; M98; M99
ROLLER BEARING A23;  A24; A31; A33
ROLL COVER V98; V10; V41
SUPPORT CENTER SCC10; SCC0; SCC5
FINISH PP94; PP09; PP11; PP24; PP45; PP95

 

HOW TO ORDER

CDLR19 - EW - RC - LG - SP - BE - EE- DRIVE - FRAME - GDRAIL - MOTOR- ROLBRG - ROLCV - SUPCC - FINISH

EXAMPLE: CDLR19 - 13 - 3.5 - 120 - 30 - 36 - 36 - D16 - F25 - G99 - M99 - A23 - V98 - SCC10 - PP94

 

 
   
   
  Product Catalog | Site Map | Contact Us | Gravity | Powered | Accessories | Systems | Parts & Service | About Us

706 Lane Street | Sandusky, OH 44870
Sales: 419-625-4014 | Fax: 419-625-1247 | Email: sales@lewcoinc.com

Copyright (c) 2005 LEWCO, Inc. All rights reserved.