Belt Driven Live Roller Conveyor by LEWCO, Inc. Model BDLR26

Product Quick Search

Product Literature


Click here to view product catalog in PDF format. Click here to receive a copy of our current conveyor & conveyor accessory catalog.

Knowledge Base

Bearing Basics
Belt Lacing Instructions
Belt Tracking
Belt Replacement Guide
Belt Selection Guide
Conveyor Maintenance
Drive Chain Tensioning
Glossary - Conveyor Terms
Gravity Conveyor Basics

Click here
to learn
more
about our
Plastic
Belt
Conveyors

Subscribe to our Newsletter!
View Newsletter Archive

Belt Driven Conveyor Products

MODEL BDLR26
BELT DRIVEN LIVE ROLLER CONVEYOR 2.625" DIA., 7 GAUGE ROLLERS

Catalog Sheet

Roll your pointer over the numbers
to view the feature description.

Carrier Roller: 2.625” dia., 7 ga. wall tubes with 11/16 hex cold rolled steel axle spring retained. Standard A51 bearings are greased lubricated.
Roll Centers: 3.00”, 4.00”, and 6.00”
Belting: Standard B25 PVC-120 black, friction surface. Belt is shipped laced and installed on conveyors up to 10’ long. On all other conveyors the belt is shipped loose with lacing installed for field installation.
Between Frames: Standard widths are 39”, 43”, 51”, 57”, 61”, 65”, 73”, 78”, and 84”. Also available from 39” to 84” in 1” increments.
Belt Widths: 12” wide on 39 through 48” B.F., 18” wide on 49” through 84” B.F. conveyors.
Length: 10’ to 80’ in 1” increments.
Standard Sections: 60” long, adjustable with jack screws.
Drive: Standard D46 - end, right hand side, 8” pulley. Drive has cast iron worm gear speed reducers with standard M03 3/4 H.P. 230/460 volt TEFC motor.
Speed: Standard 30 feet per minute. Also available from 10 to 120 fpm.
Bearings: Sealed pre-lubricated, cast iron flange ball bearings.
Frame: 11-3/8” x 1-1/2” x 3/16” formed steel channels.
Drive Pulley: 8” dia. with 1-7/16 dia shaft crowned and lagged. Mounted in 2 bolt flange bearing.
Take-Up Pulley: 4” dia. with 1-3/16” dia. shaft, crowned mounted in 2 bolt flange bearing.
Snubber Roller: 2.5 dia. 11 ga. wall tubes with 11/16 hex cold rolled steel axle, spring retained. Standard A53 bearings are grease packed with front and back seals.
Tension Roller: 1.9 dia. 11 ga. wall tubes with 7/16” hex cold rolled steel axles, spring retained. Standard A11 bearings are grease packed. The same for return rollers.
Capacity: 1000 pounds per lineal foot. Maximum 4000 pounds unit load per section. Total conveyed load not to exceed capacity shown in chart.
Supports: SPHH style located on nominal 5’ centers available for top of carrier rollers above 12” to 42” at no additional charge. No support required for minimum elevation 12” top of bed rollers.
Roll Covers: Standard V98: No Roll Cover
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat.

OPTIONAL COMPONENTS (Click for description)
BELT	B25; B06
DRIVE	D46; D47
MOTOR	M03; M01; M02; M04; M05; M06; M07; M08; M09; M10; M11; M16; M27; M31; M32; M33; M34; M102; M103; M104; M105; M106
ROLLER BEARING	A51; A53; A55; A59; A60; A62
ROLL COVER	V98; V73
SUPPORT CENTER	SCC0; SCC5; SCC10
FINISH	PP94; PP09; PP11; PP24; PP45; PP95; PP99

HOW TO ORDER

BDLR26 - BF - RC - LG - SP - BE - EE- BELT - DRIVE - MOTOR - ROLBRG - SUPCC - FINISH

EXAMPLE: BDLR26 - 51 - 6 - 600 - 30 - 36 - 36 - B25 - D46 - M03 - A51 - V98 - SCC5 - PP94

706 Lane Street | Sandusky, OH 44870
Sales: 419-625-4014 | Fax: 419-625-1247 | Email: sales@lewcoinc.com