Roll your pointer over the numbers
to view the feature description.

 

Rollers: 2.500 dia. tapered to 1.687 dia. 14 ga. wall tubes with 7/16 hex cold rolled steel axles, spring retained. Standard A42 bearings are light oil lubricated. 250 lbs. roller capacity.
Frames: Standard FC42 set high 3 1/2" x 1 1/2" x 1/8” formed steel channels with 2 x 3/16” galvanized angled crossties.
Couplings: Bolted butt couplers standard both ends of
channel.
Width: Standard width is listed in table. Available from 13" to 51" between frames.
Frame Capacity: 650 lbs. evenly distributed live load with supports at each end. 90-degree curves require an additional support at center.
Guard Rail: Standard G99. No Guardrail.
Roll Cover: Standard V98: No Roller cover.
Finish: Standard PP94: Safety Blue, Epoxy Power Coat

OPTIONAL COMPONENTS
(Click for description)

FRAME
ROLLER BEARING
ROLL COVER
FINISH

FC42
A42; A43
V98
PP94; PP09; PP11; PP24; PP45; PP95

HOW TO ORDER

25TRC - BF - DEG - FRAME - RLBRG - ROLCV - FINISH

EXAMPLE: 25TRC - 13 - 90 - FC42 - A40 - V98 - PP94